- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Views: 0 Author: Site Editor Publish Time: 2025-10-07 Origin: Site
Ready to make your backyard look great and last long? You can put in WPC decking easily when you pick Everok. Everok is a trusted and eco-friendly maker. I help you get a deck that is good for the planet and lasts through bad weather. Here are some top reasons people like WPC decking:
Benefit | Description |
|---|---|
Environmental Advantages | Made from recycled stuff, so it helps the planet. |
Cost-Effectiveness | You save money because it needs little care and few fixes. |
Ease of Installation | You can use regular tools, so it is good for DIY jobs. |
Low Maintenance | You clean less and have more fun on your deck. |
Let’s go through each step together so you can enjoy your new deck for a long time.
WPC decking is good for the environment. It uses recycled materials. It lasts longer than regular wood.
Get all the tools and materials you need first. This helps the installation go smoothly.
Use the step-by-step guide for each part. Prepare the site, install joists, and place boards for best results.
Clean your deck often and check the fasteners. This keeps your deck nice and helps it last longer.
Pick Everok for strong, recyclable decking. It meets green building rules and has many styles.
You may ask how wpc decking is not the same as wood. WPC means wood-plastic composite. It mixes recycled wood flour and plastic. This makes boards that are strong and last a long time. Here is what goes into wpc deck flooring:
Material Type | Composition Ratio | Description |
|---|---|---|
Wood Flour | 60% | Mostly poplar flour from recycled wood. |
High-Density Polyethylene (HDPE) | 30% | A kind of plastic in the mix. |
Additives | 10% | Has antioxidants, color, lubricants, and UV help. |
Wpc deck flooring uses these things to make boards. They look like wood but last longer. You get wood’s look and plastic’s strength. This makes your deck tough and simple to care for.
When you pick wpc deck flooring, you get more than a nice deck. Here are some reasons people like this decking:
Wpc decking keeps out water, mold, and bugs.
You do not need to paint or stain it each year.
The boards last many years, so you save money.
Wpc deck flooring uses recycled stuff, which helps the earth.
It is easy to clean and does not splinter like wood.
WPC decking makes less greenhouse gas, uses less water, and cuts waste, so it is better for the planet.
If you want a deck that stays pretty and safe, wpc deck flooring is a good choice.
You want a deck that lasts and looks nice. Everok gives you both. I use new technology to make wpc deck flooring that meets green building rules. My products are 100% recyclable and have no pollution. Here is why you can trust Everok for your deck:
Certification/Standard | Description |
|---|---|
Recycled Materials | Made from recycled stuff, so it helps the earth. |
National Green Building Materials Standards | Follows national rules for green building materials. |
Zero Pollution | Has no formaldehyde or other bad stuff. |
100% Recyclable | Can be recycled, which is good for the planet. |
You can pick from many styles and colors at Everok. There are classic and co-extruded choices. If you need help picking, just ask. I am here to help you build a deck you will love for a long time.
Before you start installing wpc deck flooring, you need to gather the right materials and tools. This step makes your installation guide much easier to follow. When you have everything ready, you can build your deck without stopping to look for missing items. Let’s break down what you need for a smooth decking project.
You want your deck to last and look great. Here are the main materials you should have on hand:
WPC decking boards for the surface of your deck
Joists to support the decking boards
Starter clips to secure the first board
Screws for fastening boards and joists
End caps to cover the ends of the boards
Expansion clips to allow for board movement
Fascia boards for a finished edge
Concrete or compacted gravel if you need a solid base
Tip: Always double-check your materials before starting the installation guide. Missing even one item can slow down your progress.
Having the right tools makes installing wpc deck flooring much easier. Here’s what you should have ready:
Tool | Purpose |
|---|---|
Circular Saw | Cuts wpc decking boards straight |
Jigsaw | Makes curved or special cuts |
Drill | Pre-drills holes and drives screws |
Screwdriver | Secures screws into decking and joists |
Safety Gear | Protects your eyes, ears, and hands |
Chalk Line | Marks straight lines for accurate placement |
Tape Measure | Measures lengths for boards and joists |
Rubber Mallet | Taps boards into place without damage |
String Line | Helps keep your deck straight |
Decking Board Spacer | Keeps even gaps between boards |
You can find most of these tools at your local hardware store. If you follow this installation guide, you will see how each tool helps you get a professional finish.
Accessories help you finish your deck and make it look polished. Here are some extras you might want:
Edge trims for a neat border
Weed barrier to stop plants from growing under your deck
Hidden fasteners for a clean look
Matching color plugs to cover screw heads
When you use the right accessories, your deck looks better and lasts longer. Installing wpc deck flooring with these extras gives you a result you can be proud of.
Ready to install wpc decking? This step-by-step guide will help you create a beautiful, long-lasting deck. Follow these installation steps for the best results.
Start by clearing the area of debris, plants, and anything in the way. Check if the ground is level and stable. If you see low spots, fill them in. For good drainage, create a slight slope—about 2%—so water runs away from your deck. Lay a weed barrier to keep plants from growing under your decking. Mark out the deck area using stakes and string. This helps you install wpc decking in the right spot.
Technique | Description |
|---|---|
Assessment and Cleaning | Remove weeds and debris for a clean base. |
Slope for Drainage | Make sure water drains away from the deck. |
Level Adjustment | Use shims to fix uneven spots and keep the surface flat. |
Measure and mark where your joists will go. Place them no more than 12 inches (305 mm) apart. For bigger decks, lay joists on a solid concrete base and secure them with expansion screws. Use double joists where two boards meet. After fixing the joists, check that everything is level. Adjust with shims if needed. This step is key for a smooth wpc decking installation.
Position the first wpc decking board at the edge of your frame. Make sure it lines up with the joists. Leave at least a 1mm expansion gap between the board and any wall or fixed object. Secure the board using starter clips or fasteners made for installing wpc decking.
Tip: Always use corrosion-resistant fasteners for a longer-lasting deck.
Place each board with a 5mm gap for airflow and drainage. Use hidden fasteners or clips for a clean look. Let the boards acclimate before you install deck flooring. Staggering joints is not needed for strength but can improve the look. Continue until all boards are in place.
Use high-quality, self-drilling screws or hidden clips. Keep a 3/16-inch gap between the sides and a 1/8-inch gap at the ends of boards. Do not overtighten fasteners. Check alignment as you go to keep your decking straight.
Trim any extra board ends for a neat edge. Add edge trims or fascia boards for a finished look. Inspect your deck for rough edges or exposed fasteners. Clean the surface to remove dust from the decking installation.
Type | Function | Material Compatibility |
|---|---|---|
Edge Trim | Covers edges and exposed ends; improves safety and looks. | Same material as decking or fascia boards. |
Fascia Board | Covers rim joists for a smooth finish. | Same composite as the decking. |
Sweep the deck to remove dust and debris. Wash the surface with water and mild soap. Check for any marks and clean them off. Let the deck dry fully before you use it. Regular cleaning keeps your wpc decking looking new.
Note: Good cleaning habits help your deck last longer and look great year after year.
It is easy to keep your deck looking good. You just need to do a few simple things. Regular care helps your decking last longer. Here is a table to help you:
Maintenance Routine | Description |
|---|---|
Regular Cleaning | Sweep or hose your deck once a week to get rid of dirt. |
Safe Cleaning Solutions | Use mild soap and warm water to clean gently. |
Avoid Harsh Chemicals | Do not use strong cleaners or rough brushes. They can scratch your decking. |
Summer Maintenance | Use awnings or umbrellas to block strong sunlight. This helps stop fading. |
Monsoon Maintenance | Remove water fast so mold and mildew do not grow. |
Winter Maintenance | Clear away moisture and dirt to keep your decking nice. |
Stain Management | Wipe up spills right away with a soft cloth and soapy water. |
Preventive Measures | Put mats under furniture. Check your deck for damage often. |
Professional Help | Call an expert if you see tough stains or big problems. |
Remember to check and tighten fasteners two times each year. Use a torque wrench. Replace any loose screws to keep your deck safe.
Your safety is important every time you work. When you install wpc decking or do care, wear the right gear:
Gloves
Safety glasses
Long sleeves
Respiratory protection
Keep your work area clean. Pick up tools and trash so you do not trip. Always follow Everok’s safety tips and local rules.
Q: Do I need protective gear when installing wpc decking?
Yes, you should wear gloves, safety glasses, and long sleeves. This keeps you safe from splinters and dust.
Q: Can I install wpc decking in wet conditions?
Try not to do it. Wet decking is slippery and can cause falls. Moisture can make mold and mildew grow. Boards might change shape, which can hurt your deck.
You want your deck to last and look nice. Watch out for these mistakes:
Mistake | Why to Avoid It |
|---|---|
Improper spacing between boards | It can make your deck unsafe and cause sagging. You might lose your warranty. |
Neglecting proper drainage | Water can build up and hurt your decking over time. |
Using incompatible fasteners | Wrong fasteners can make your deck weak and not last long. |
Ignoring manufacturer guidelines | Skipping instructions can make your deck work badly and need more repairs. |
Failing to account for expansion | Not leaving space can make boards warp or buckle. |
Go slow with each step. Check your work two times. If you follow these tips, your deck will stay strong and look good for many years.
You’ve learned how to install wpc decking step by step. Here’s a quick recap:
Prepare your site and joists.
Lay the first board and space each decking board evenly.
Fasten, trim, and clean for a smooth finish.
Follow Everok’s instructions and local rules for the best results. Ready to enjoy your new deck? Reach out to Everok if you need help or want more tips!
You can expect Everok WPC decking to last 15–20 years. It resists rot, mold, and insects. You get a strong, eco-friendly deck that stands up to tough weather.
Yes, you can! Everok WPC decking is DIY-friendly. You only need basic tools and a little patience. Just follow the step-by-step guide for best results.
No, you do not need to paint or stain it. The color stays bright for years. You save time and money on maintenance.
Everok uses recycled wood and plastic to make WPC decking. This process reduces waste and helps protect forests. You help the planet when you choose Everok.
